BRIDGEMATE PROTECTION COURSE PLANK
PRODUCT SPECIFICATIONS
| Components |
Asphalt, with selected mineral fibers and fillersuniformly shaped by
extrusion. Also, contains recycled materials and is non-toxic. |
| Color |
Black |
| Size |
12 inches wide by up to 24 inches long |
| Thickness |
1/2 inch | 3/4 inch | 1 inch | 2 inches |
| Weight / Density per 100 sq. ft. |
5 lbs. | 7.5 lbs. | 10 lbs. | 20 lbs. |
| Surface |
Smooth, can be painted for traffic markings and coated with cut-back or emulsions |
| Joints |
Edge joints are available in a ship lap or lap configuration and in a butt joint configuration. |
| McBurney Indentation |
A minimum of 20 mils and maximum of 60 mils @77 degrees F (25 degrees C) for 1 minute |
| Specifications |
Surpasses ASTM D517 specifications, and asphalt plank is an approved product in the AREA Chapter 29 Waterproofing Manual |
| Dimensional Tolerance |
Width: (+/-) 1/8 inch
Length: (+/-) 1/4 inch |
| Brittleness |
6
inch by 6 inch by 1/2 inch thick sample @ 32 degrees F (0 degrees C)
will not split or crack when a 2 lb. weight is dropped 20 inches onto a
0.225 diameter pin. |
| Water Absorption |
Less than 0.5 percent for 24 hour immersion |
| Limitations |
Bridgemate is a thermoplastic material and will conform directly to the surface over which it is being installed. |
|
|
