BRIDGEMATE PROTECTION COURSE PLANK
PRODUCT SPECIFICATIONS
| Components | Asphalt, with selected mineral fibers and fillersuniformly shaped by extrusion. Also, contains recycled materials and is non-toxic. | |||
|---|---|---|---|---|
| Color | Black | |||
| Size | 12 inches wide by up to 24 inches long | |||
| Thickness | 1/2 inch | 3/4 inch | 1 inch | 2 inches |
| Weight / Density per 100 sq. ft. | 5 lbs. | 7.5 lbs. | 10 lbs. | 20 lbs. |
| Surface | Smooth, can be painted for traffic markings and coated with cut-back or emulsions | |||
| Joints | Edge joints are available in a ship lap or lap configuration and in a butt joint configuration. | |||
| McBurney Indentation | A minimum of 20 mils and maximum of 60 mils @77 degrees F (25 degrees C) for 1 minute | |||
| Specifications | Surpasses ASTM D517 specifications, and asphalt plank is an approved product in the AREA Chapter 29 Waterproofing Manual | |||
| Dimensional Tolerance | Width: (+/-) 1/8 inch Length: (+/-) 1/4 inch |
|||
| Brittleness | 6 inch by 6 inch by 1/2 inch thick sample @ 32 degrees F (0 degrees C) will not split or crack when a 2 lb. weight is dropped 20 inches onto a 0.225 diameter pin. | |||
| Water Absorption | Less than 0.5 percent for 24 hour immersion | |||
| Limitations | Bridgemate is a thermoplastic material and will conform directly to the surface over which it is being installed. | |||
Comfortwalk | Arena | Marine Deck
Bridgemate | Maintenance | About Elsro, Inc. | Contact Us