COMFORTWALK INDUSTRIAL FLOORING
PRODUCT SPECIFICATIONS
| Components | Asphalt, with selected mineral fibers and fillersuniformly shaped by extrusion. Also, contains recycled materials and is non-toxic. |
|---|---|
| Specifications | Meets United States Postal Service (USPS) Flooring Section 09621 for Asphalt Plank Flooring |
| Color | Black, Red, or Gray |
| Weight / Density | 5.35 lbs. / sq. ft. minimum (1/2 inch thickness) |
| Size | 12 inches wide by 24 inches long |
| Thickness | From 1/4 inch to 3 inches |
| Surface | Smooth, can be buffed to a high gloss |
| McBurney Indentation | A minimum of 20 mils and maximum of 40 mils @77 degrees F (25 degrees C) for 1 minute, ASTM F-142 |
| Flame Propagation Index | 0.16; Using UL Method 992 |
| Dimensional Tolerance | Width: (+/-) 1/16/inch Length: (+/-) 1/16 inch Thickness: (+/-) 1/32 inch |
| Brittleness | 6 inch by 6 inch by 1/2 inch thick sample @ 32 degrees F (0 degrees C) will not split or crack when a 2 lb. weight is dropped 20 inches onto a 0.225 diameter pin. |
| Water Absorption | Less than 0.5 percent for 24 hour immersion |
| Limitations | Asphalt is a thermoplastic material. Therefore some deformation may occur with point loading at high temperatures. |
Comfortwalk | Arena | Marine Deck
Bridgemate | Maintenance | About Elsro, Inc. | Contact Us