Search this site


ELSRO TOP COAT - STATIC FREE


DESCRIPTION

Elsro Top Coat - SF is a high solid, static dissipating floor finish formulated with conductive polymers to prevent static generation and to dissipate static charges on any conventional floor. It's generally applied after application of several coats of pigmented base coat.

Type Metal cross link acrylic copolymer
Solids (Theoretically non-volatile) 24% +/- .5%
Density 8.63 lbs. per gallon
Specific Gravity at 60 degrees F = 1.035
Oven Stability ANSI/ASTMD 1791 - 66 - not effected by water. Accelerated aging of liquid water-emulsion floor polishes.
Conductive Range Static dissipative

PREPARATORY WORK

The floor should be stripped of all old wax or finish and rinsed thoroughly.

SAFETY PRECAUTIONS

Use in a well ventilated area. Keep out of reach of children, and avoid contamination of food. May cause eye irritation and is harmful if swallowed.

WORKING CHARACTERISTICS

Apply at 1,800 - 2,000 square feet per gallon.

INSTALLATION INSTRUCTIONS

1) The floor should be stripped of all old wax or finish and rinsed thoroughly. Once the floor has dried, apply the prescribed number of coats of base coat followed by even coats of Top Coat - SF floor finish with clean mop or applicator.
2) Each coat should be thoroughly dried for 30 - 60 minutes, depending on temperatures and humidity. Proper application of additional coats as required will dramatically increase gloss and provide proper conductivity in the static dissipating range.

MAINTENANCE

Floors coated with Top Coat - SF should be maintained regularly to assure full static control of non-conductive floors. High traffic areas should be damp-mopped with a neutral pH cleaner and re-coated with Top Coat - SF when worn. Note that excessive moisture and/or humidity may cause white blooming on the coating.