MARINE DECK PLANK
PRODUCT SPECIFICATIONS
| Components |
Rubberized
asphalt with selected mineral fibers and fillers, uniformly shaped by
extrusion. Also contains recycled materials and is non-toxic. |
| Specifications |
Marine
Deck Plank meets U.S. Coast Guard requirements for exterior decking
materials, and 1/4 inch Marine Deck Plank Meets U.S. Coast Guard
interior requirements. |
| Color |
Black, Red |
| Size |
12 inches wide by 24 inches long |
| Thickness |
1/4 inch | 1/2 inch | 3/4 inch | 1 inch |
| Weight / Density |
2.50
lbs./sq. ft. | 5.25
lbs./sq. ft. | 7.75
lbs./sq. ft. | 10.50
lbs./sq. ft. |
| Surface |
Rough or non-slip pattern for traction; can be painted for traffic marking and coated with cut-back or emulsions |
| McBurney Indentation |
A minimum of 30 mils and maximum of 65 mils @77 degrees F (25 degrees C) for 1 minute, ASTM F-142 |
| Flame Propagation Index |
0.16; Using UL Method 992 |
| Dimensional Tolerance |
Width: (+/-) 1/16/inch
Length: (+/-) 1/8 inch
Thickness: (+/-) 1/32 inch |
| Water Absorption |
Less than 0.5 percent for 24 hour immersion |
| Limitations |
Deck
Plank is not recommended over a painted surface. Asphalt is a
thermoplastic material. Therefore some deformation may occur with point
loading at high temperatures. | |
|
