MARINE DECK PLANK
PRODUCT SPECIFICATIONS
| Components | Rubberized asphalt with selected mineral fibers and fillers, uniformly shaped by extrusion. Also contains recycled materials and is non-toxic. | |||
|---|---|---|---|---|
| Specifications | Marine Deck Plank meets U.S. Coast Guard requirements for exterior decking materials, and 1/4 inch Marine Deck Plank Meets U.S. Coast Guard interior requirements. | |||
| Color | Black, Red | |||
| Size | 12 inches wide by 24 inches long | |||
| Thickness | 1/4 inch | 1/2 inch | 3/4 inch | 1 inch |
| Weight / Density | 2.50 lbs./sq. ft. | 5.25 lbs./sq. ft. | 7.75 lbs./sq. ft. | 10.50 lbs./sq. ft. |
| Surface | Rough or non-slip pattern for traction; can be painted for traffic marking and coated with cut-back or emulsions | |||
| McBurney Indentation | A minimum of 30 mils and maximum of 65 mils @77 degrees F (25 degrees C) for 1 minute, ASTM F-142 | |||
| Flame Propagation Index | 0.16; Using UL Method 992 | |||
| Dimensional Tolerance | Width: (+/-) 1/16/inch Length: (+/-) 1/8 inch Thickness: (+/-) 1/32 inch |
|||
| Water Absorption | Less than 0.5 percent for 24 hour immersion | |||
| Limitations | Deck Plank is not recommended over a painted surface. Asphalt is a thermoplastic material. Therefore some deformation may occur with point loading at high temperatures. | |||
Comfortwalk | Arena | Marine Deck
Bridgemate | Maintenance | About Elsro, Inc. | Contact Us